Re: Asterisk is not easy to trouble shoot

Aaah, Finally, I figured it out… It was a due to DHCP and DNS.. My setup is a server with two interfaces, this server is used for internet browsing as well as PBX. Now, eth0 is configured for the local network with a static IP. eth1 is configured for DHCP and connected to the router. And it was the issue, when I disabled the DHCP client and configured everything keeping in mind that the router DNS had a bug, thus I configured the ISP dns. It worked!! I am soooo happy.. I spent days trying to figure out the issue, now it works

Asterisk is not easy to trouble shoot

I have setup Asterisk PBX, everything works perfectly, with one SIP trunk, however, when I try to add the second trunk, it just doesn’t register to any of them. When I read the logs, I see that it times out while registering… So, I run tcpdump and try to see what’s going on… From what I have seen is that it sends the register command to the SIP server, however, the SIP server replies back saying:

SIP/2.0 401 Unauthorized – no credentials are provided

Now, I am researching this issue, I hope I can fix this soon.